Back of the wheel well is the driver-side pivot point located on a Type II ambulance. This answer has been confirmed as correct and helpful.
What is the pivot point of a Type 2 ambulance?
Pivot point is the center of the rear axle on both sides, unless your driving something with dual rear axles, then it’s the center of the space between the axles. The spotter should be in a visible safe zone positioning him/herself ten (10) to fifteen (15) feet at the left rear of the ambulance.
Where is the driver-side pivot point located on a Type I ambulance?
At the center of the rear hubcap is where the driver-side pivot point located on a type 1 ambulance. At the center of the rear hubcap is where the driver-side pivot point located on a type 1 ambulance. This answer has been confirmed as correct and helpful.
What is the 4 5 12 rule Evoc?
According to the 4-5-12 rule, what is the following distance he must maintain? 5 seconds!
What does ALCS mean in Evoc?
The acronym ALCS stand for in EVOC is Active Learning Community Service.
What is Type 2 ambulance?
Type II ambulances are built using a van-type chassis, with a raised roof being the only major modification to this vehicle beyond a standard van. Type II ambulances are mostly used by hospitals and health organizations to transport patients who require basic life support features.
What is driving with due regard?
Due regard can be defined as driving in a manner to avoid any predictable collision. As noted above, the emergency vehicle driver must provide adequate warning to others by using the warning devices, and by controlling their speed to allow other motorists time to react to their warning.
What is the best place for a spotter to stand in an ambulance?
The spotter should be in a visible safe zone positioning him/herself ten (10) to fifteen (15) feet at the left rear of the ambulance.
When entering a turn you should reduce centrifugal force by?
When entering a turn, you should reduce the centrifugal force acting on your vehicle by:
- Slow down, shift to a lower gear, and do any braking before you enter the curve.
- Entering the curve towards the right edge of the roadway to avoid any potential conflicts with oncoming traffic.
What is the purpose of a jump kit?
The purpose of a jump kit is to: contain anything that you might need during the first 5 minutes of patient care. Upon arriving at the scene of a major motor vehicle crash at night, you find that the safest place to park your ambulance is in a direction that is facing oncoming traffic.
When you are dispatched to an emergency it is most important to?
21. When you are dispatched to an emergency, it is MOST important to: A) take a route that will ensure a fast response time.